品牌：UD优道

系统：引擎舱保养

引擎外部清洁剂    发动机镀膜剂

产品编号：UD-222-2/ 325ML   UD-221-1/125ML

企业标准：Q/YK 034-2009        Q/YK 026-2009   

产品仅供4S店使用

引擎外部清洁剂 

产品性能：

本产品由多种表面活性剂、渗透剂、保护剂等配制而成，产品分解去污能力强，对各种材质的部件无腐蚀，对发动机表面的油渍、污垢物质有很好的清洁作用。

使用方法：

1、先用龙卷风清洗枪将发动机外部用清水冲去泥沙、灰尘；

2、用专用工具将本品喷洒在发动机外部，并浸泡2-5分钟；

3、用毛刷去油泥严重的地方；

4、用清水将发动机外部清洗干净，并吹干线路接头。

注意事项：

1、本品应在阴凉、干燥通风处存放，远离火源；

2、严禁入口，溅入眼内请立即用清水冲洗；

3、远离儿童。

发动机镀膜剂

产品性能：

防止线路、线束、水管、皮带等橡胶制品的龟裂老化现象；超强的渗透性能，能有效修复线路上的细微裂缝，使用后在发动机电路表面及接插头处形成绝缘膜，隔绝水气，抗氧化；防止线路开路、短路、爆裂，防止自燃事故的发生，提高汽车电路工作效率，还原发动机动力。

使用方法：

1、将发动机外部吹干；

2、用专用喷枪将本品均匀喷涂在发动机外部；

3、用毛巾擦去喷涂不均匀的地方；

4、待喷完3分钟，检查喷涂效果即可交车。

注意事项：

1、本品应在阴凉、干燥通风处存放；

2、严禁入口，溅入眼内请立即用清水冲洗，远离儿童；

3、严禁将本品直接喷涂在高温的发动机部件，以免引起危险！

4、眼睛接触，请立即用大量清水冲洗，并立即就医，如误食，不要催吐，立即就医，并出示该产品的盛装容器或标签。

Engine exterior cleaner

Product performance:

This product by a variety of surface active agent, penetrating agent, protective agent made from, such as product decomposition decontamination capability, no corrosion of all kinds of parts, the engine oil and dirt on the surface of the material has good cleaning effect.

Usage:

1. First, use the tornado cleaning gun to flush the outside of the engine with water to remove sediment and dust;

2. Spray the product on the outside of the engine with special tools and soak for 2-5 minutes;

3. Use a brush to remove serious sludge;

4. Clean the outside of the engine with clean water and blow dry the wiring connector.

Notes:

1. This product should be stored in a cool, dry and ventilated place, away from the source of fire;

2. It is strictly prohibited to enter the entrance, and please flush with water immediately after splashing into the eyes;

Stay away from children.

Engine coating agent

Product performance:

Prevent cracks and aging of rubber products such as lines, wire bundles, water pipes and belts; Super permeability, can effectively repair the minor cracks on the line, after the use of the engine circuit surface and plug where the insulation film, water and gas isolation, anti-oxidation; Prevent the circuit opening, short circuit, burst, prevent the occurrence of spontaneous combustion accident, improve the working efficiency of automobile circuit, restore the engine power.

Usage:

1. Blow the outside of the engine dry;

2. Spray the product uniformly on the outside of the engine with a special spray gun;

3. Use the towel to wipe away the uneven spray areas;

4. After 3 minutes of spraying, check the spraying effect and hand it in.

Notes:

1. The product should be stored in a cool, dry and ventilated place;

2. It is strictly prohibited to enter the entrance. If it is splashed into the eyes, please immediately rinse it with water and keep away from children.

3. It is strictly prohibited to spray this product directly on high-temperature engine parts, so as to avoid the danger!

4. In case of eye contact, please rinse immediately with plenty of water and seek medical advice immediately. If you eat the product by mistake, do not urge vomiting, seek medical advice immediately, and show the container or label of the product.